Metallurgy Forging Casting Unhardened steel and Nonferrous
Metals Brinell Hardness Tester XHB-3000
Usage Range
The Brinell hardness test that shows the largest indentation among all the hardness tests is able
to reflect the comprehensive features of the material, and the test is unaffected by the
organizational micro-dioptre and the compositional unevenness of the speciment; and hence it is
a hardness testing with high precision. The Brinell hardness test is widely used in such industrial
fields as metallurgy, forging, casting, unhardened steel and nonferrous metals industries, as well
as in the laboratories, universities, colleges and scientific research institutes.
Main Features
XHB-3000 Digital Brinell Hardness Tester is a unified product combining the precise mechanical
structure with the computer control by means of the optical, mechanic and electrical circuit
system, and so it is the most advanced brinell hardness tester in today’s world. The instrument
adopts the motorized test force application without weight blocks, and uses 0.5‰ accuracy
compression sensor to feedback the information and the CPU control system to automatically
compensate the test force lost during the testing. The indentation is directly measured on the
instrument through the microscope, and the LCD screen indicates the diameter, the hardness
value, and 17 different hardness testing comparison tables as well as the HBW range
automatically shown under the present presetting. It is possible to preset the load dwell time and
the intensity of the light on the window page ,and design a F/D2 selection table to facilitate the
operation of the user. The instrument is completed with a RS232 serial interface connected with a
PC for final read-out, the printer and the date storage.
Main Parameters
| Testing Range:(8～650)HBW |
| Test Force:612.9N(62.5Kgf),980N(100Kgf),1226N(125Kgf),1839N(187.5Kgf),2452N(250Kgf),4900N(500Kgf),7355N(750Kgf),9800N(1000Kgf),14700N(1500Kgf),29400N(3000kgf) |
| Accuracy of Displayed Hardness Value |
| Hardness Range(HBW) | Max tolerance％ | Repetition％ |
| ≤ 125 | ± 3 | ≤ 3.5 |
| 125＜HBW≤225 | ± 2.5 | ≤ 3.0 |
| ＞ 225 | ± 2.0 | ≤ 2.5 |
| Max Height of the speciment: 225mm |
| Max Distance from the indenter center to the instrument panel: 135mm |
| Magnification of the microscope: 20X |
| Min Reading Grade of the Drum wheel of the microscope: 0.00125mm |
| Power supply and Voltage: AC220V/50-60Hz |
| Main Accessories |
| Tables: large, small,and v-shaped each |
| Hard Alloyed Steel Balls Indenters: Φ2.5mm, Φ5mm and Φ10mm each. |
| One Microscope: 20X |
| Two Standard Hardness Blocks. |
TAG: Digital Vickers Hardness Tester
Hardness Testers Micro Vickers Hardness Meter
|
|
Metallurgy Forging Casting Unhardened steel and Nonferrous Metals Brinell Hardness Tester XHB-3000 Images
|
